Heavy Duty Pop Up Canopy with Sides: 10x10 Pop Up Tent with Sides
By Darrin DeTorres · Notice Me Marketing & Media · Updated
An open canopy gives you shade. Add sides and it blocks low sun, wind, and sideways rain, and gives you a back wall to print your name on. Every Team Tents canopy takes zip-on full walls or half-walls, ordered one side at a time.

What Is a Pop Up Tent with Sides?
A pop up tent with sides, or pop up canopy with sides, is a portable folding tent frame with removable or attached sidewalls. The walls block sun, rain, wind, and prying eyes, turning an open shade cover into a partly or fully enclosed space for events, markets, sports, and backyard gatherings.
On a Team Tents canopy the walls are removable: each one zips in at the eave and fastens to the legs, so you can run fully open, fully enclosed, or anything in between. See all canopy with walls: sidewalls for pop up canopies.
Shop Pop Up Canopies with Sides
Every canopy is custom printed, every wall is optional, and every order is quoted to the job.
10x10 Canopy with Sides
40mm or 50mm hex aluminum frame, one-person setup in under 5 minutes. Takes 10ft full walls or half-walls on any side.
See the 10x10 canopy →10x20 Canopy with Sides
50mm hex aluminum frame, rated to 50 mph anchored. 20ft walls on the long sides, 10ft walls on the ends.
See the 10x20 canopy →10x15 Canopy with Sides
More room than a single stall without a full double. 40mm or 50mm hex aluminum frame, set up by 1–2 people. Wall options are confirmed on your quote.
See the 10x15 →Sidewalls for Pop Up Canopies
Already have a Team Tents canopy? Add printed full walls or half-walls one at a time.
See sidewalls →Types of Canopy Sidewalls
Five common wall styles, what each one is for, and which ones we make.
Solid Walls
Floor-to-canopy fabric panels, about 78 inches tall on our tents. A solid wall blocks low sun, wind, and sideways rain, and four of them close the canopy into a lockable-looking box for retail or a private team area. Ours are 600D PU polyester, printed in full color.
We make these
Half Walls
Waist-height panels, about 36 inches tall, that border the canopy without closing it in. Customers can still see in and staff can still see out, which is why half-walls are the default for market stalls, vendor rows, and sidelines.
We make these
Mesh / Screen Walls
Open-weave panels that keep bugs out and let air through. They cut some sun and wind but don't stop rain, and they offer little privacy.
Ask on your quote
Window Walls
Solid walls with a clear or mesh window panel. They keep weather out while letting light in and letting people see the space inside.
Ask on your quote
Door / Zip Walls
Solid walls with a zippered opening, so you can close the canopy fully and still walk in and out without unclipping a panel.
Ask on your quote
Sidewall Protection Compared
| Wall Type | Sun | Rain | Wind | Bugs | Privacy |
|---|---|---|---|---|---|
| Solid wall | High | High | High | Partial | Full |
| Half wall | Low | Low | Partial | None | Partial |
| Mesh / screen | Partial | None | Partial | High | Low |
| Window wall | Partial | High | High | Partial | Partial |
| Door / zip wall | High | High | High | Partial | Full |
Ratings are for one wall on the side it faces. Half-walls are about 36 inches tall, so they only cover the lower part of that side.
How to Choose a Pop Up Canopy with Sides
Five things to settle before you order walls.
Size and Frame
Start with the footprint you're assigned. A 10×10 fits most vendor stalls, sidelines, and tailgate slots and takes 10ft walls. A 10×20 takes 20ft walls on the long sides. Pick the 50mm hex aluminum frame if the canopy will wear walls in open, windy sites.
Weather
Sun from one side? One solid wall on that side does the job. Rain or wind? Solid walls on the windward sides. Our 600D PU polyester is waterproof, UV-resistant, and flame retardant, on both the canopy and the walls.
Ventilation
Four solid walls trap heat on a still, sunny day. Leave the front open, or mix solid walls on the weather side with half-walls elsewhere so air keeps moving.
Setup Time
The frame goes up first: one person in under 5 minutes on a 10×10, two people on a 10×20. Each zip-on wall then takes about 60 seconds for one person.
Budget
Walls are ordered one at a time, so you don't have to buy a four-wall kit on day one. Most setups start with a printed back wall and two half-walls. Every order is quoted to the job, with graphic design included.
Still choosing the canopy itself? Compare the best pop up canopy picks or read our guide to pop up tent canopies. Ready to buy? See all pop up tents for sale, or print the walls and canopy with your brand on custom pop up tents.
Does a canopy with sides need extra anchoring?
Yes. Every wall you add catches wind like a sail, so a canopy with sides pulls harder on its legs than an open one. Anchor every leg with sandbags, ground spikes, or tie-down ropes before the walls go on, keep the legs low in gusts, and avoid closing all four sides in strong wind.
Our 50mm hex aluminum frame is rated for winds up to 50 mph when anchored. That rating doesn't make an unanchored canopy safe at any speed, and above 50 mph the canopy should come down. Take the walls off first if the wind is building. How much weight each leg needs is in our canopy weights and sandbags guide.
Anchor Checklist
- Sandbags or weights on every leg on pavement.
- Ground spikes on grass.
- Tie-down ropes from the frame corners wherever you can.
- Anchor first, then hang walls.
- Legs at their shortest height in gusts.
What makes a heavy duty canopy with sides?
Walls turn a canopy into a sail, so a heavy duty canopy with sides starts with the frame. Ours is 50mm hex aluminum with 50 × 50 × 2.0 mm legs, rated to 50 mph when every leg is anchored. The top and walls are waterproof 600D polyester, and every wall zips on at the frame edge.
Choose the 50mm frame for a 10x10 with walls in open lots, at the beach, or anywhere you set up every week. The 10x20 comes on it as standard. Compare frames in our heavy duty canopy guide.
Popular Uses
Where an enclosed pop up canopy earns its walls.
Vendor Booths
A solid back wall carries your logo and hides stock; half-walls on the sides frame the booth without blocking the front.
See more →sports_soccerSports Sidelines
Full walls on the wind side make a sheltered team area for gear, water, and halftime.
See more →local_floristFarmers Markets
Half-walls keep the stall open to shoppers; a back wall blocks afternoon sun off the produce.
See more →celebrationBackyard Events
A wall or two blocks low sun and wind off a food table or gift table at a party.
See more →sports_footballTailgates
One full wall on the windward side keeps gusts and sideways rain out of the tent in an open lot.
See more →Caring for Canopy Walls
- Take the walls off before you close the frame, and roll them rather than folding them on the same crease every time.
- Never pack walls wet. Dry them completely before they go back in the bag.
- Clean with mild soap, water, and a soft brush. Skip bleach and pressure washers.
Tell Us the Size and the Sides.
Canopy size, which sides get walls, full or half height. Graphic design is included, and production runs 10–14 business days after artwork approval and payment.
Frequently Asked Questions
Waterproofing, buying walls separately, fit across sizes, and anchoring.
Sources
- Custom Tent Sidewalls & Half-Walls — wall heights, lengths, fabric, zip-on install
- 10×10 Custom Printed Tent — 40mm and 50mm frames, solo setup time
- 10×20 Custom Printed Tent — 50mm frame, 50 mph anchored wind rating
- Pop Up Tent Canopies — frame and fabric comparison, sizes